20 Christmas Light Bulbs with Clear Bulbs and White Wire

20 Christmas light bulbs with clear bulbs and white wire cords.
These premium Quality Christmas light bulbs Christmas light bulb
sets are 8 Feet long .

Christmas lights are for indoor use only.

United States UL approved for 110 volt.

Energy Saver Christmas light bulbs.

4 inch spacing between the Christmas light bulbs.

When one Christmas light bulb burns out the others remain lighted.

This Christmas light bulb set has a plug at one end which additional Christmas light bulb sets can be plugged into.

Up to three additional like Christmas light bulb sets can be added.

This holiday light set can be made to flash on and off by replacing the first steady burning bulb with a clear red tipped Christmas tree light bulb.

Replacement Christmas light bulbs, flasher light bulbs, and fuses are included.

Complete use and care instructions for the holiday light bulbs are also included.

Christmas holiday light bulbs safety instructions:
When using Christmas tree lights, basic precautions should always be followed including
these christmas holiday light safety tips.

Do not use the holiday lights outdoors unless the christmas tree lights are marked suitable
for indoor and outdoor use. When outdoor christmas lights are used in outdoor applications,
connect the outdoor christmas lights to a ground fault circuit interrupting [GFCI] electrical
outlets. If one is not provided, contact a qualified electrician for proper outdoor lights installation.

Seasonal party lights or holiday lights are not intended for permanent installation or use.

Do not mount or place christmas lights near gas or electric heaters, fireplaces, candles or
other similar sources of heat.

Do not secure the holiday light sets with staples or nails, or place on sharp hooks.

Do not let the christmas holiday light bulbs rest on the holiday lights supply cord or on any wire.

Unplug the christmas light bulbs when leaving the house, when retiring for the night, or if
the christmas tree lights are left unattended.

Your holiday lights, christmas tree lights or party lights are not toys! To avoid risk of fire,
burns, personal injury and electric shock the christmas holiday lights should not be played
with or placed where small children can reach the holiday light bulbs.

To reduce the risk of fire or electrical shock do not mount or support the christmas tree lights
or party lights in a manner that can cut or damage the holiday light sets.

Do not close your doors or windows on the christmas holiday lights or extension cords as
this may damage the wire insulation.

Do not cover the christmas holiday light bulbs or party lights with cloth, paper or any material
not part of the holiday light when in use.

If your christmas lights are equipped with push-in type light bulbs, do not twist the holiday
light bulbs. Pull the party light bulbs straight out of the light bulb socket.

To reduce the risk of overheating, replace any burned out light bulbs promptly. Use the
proper christmas holiday light bulbs with like volt and wattage replacement light bulbs.

Always unplug your christmas holiday lights before installing or replacing the christmas light bulbs.

Do not overload the electrical wiring of the holiday lights. Only connect the recommended
amount of christmas light sets [usually three sets if not stated in instructions] on one
continues light string.

Christmas holiday lights with overload fuses.
A blown fuse indicates an overloaded circuit and you need to reduce the amount of holiday
lights connected to the circuit. A blown fuse may also be caused by a short-circuit and the
christmas holiday light set with the short-circuit should be discarded.
1.) Always unplug your christmas holiday lights before installing or replacing the christmas light fuses.
2.) Slide open the holiday light fuse access cover on top of the attachment plug towards the
plug in metal blades.
3.) Remove the holiday light fuses carefully.
4.) To avoid the risk of fire replace the blown fuses with like amp and volt fuses that were
provided with the christmas lights.
5.) Slide closed the holiday light fuse access cover by sliding the cover closed so that all fuse tabs latch.
6.) To avoid the risk of fire do not replace the factory christmas light plug. The factory
holiday light plug contains a safety device (fuse) that should not be removes. Discard the
holiday light or party light set if the plug is damaged.