Darkness Sensing Digital Timer

Single electric receptacle digital light timers sense darkness
and turns your Christmas displays on. The digital outdoor photocell timer will automatically turn off your Christmas displays at a pre-selected time, set by you. No more running outside in the winter to turn your Christmas yard lights on and off. Just plug in your Christmas light display into the TimeIt digital outdoor photocell timer sensing outlet and your Christmas lights will automatically come on when the sun goes down. Just set the electric outdoor photocell timer switch to the proper setting and forget about turning your Christmas light display on or off. The digital photocell timer is raintight. The TimeIt digital photocell timer has seven settings:

F = OFF The electrical timer is off and will not function.

0 = ON The electric timer will turn your Christmas lights on and they will remain on.

d = DUSK-DAWN The electric timer will turn your Christmas lights will turn on at dusk and turn off at dawn.

1-9 = The outdoor timer will turn your Christmas lights on at dusk and turn off in the amount of hours set. This cycle repeats every 24 hours.

1.-9. = The light switch timer will turn your Christmas lights on immediately and turn off in the amount of hours set. This cycle repeats every 24 hours.

This light sensing single outlet 110-volt timer is rated to handle up to 8 amps, 1000 watts of electrical current. The indoor or outdoor lighting timers include a four inch grounded power cord. The lighting timers nickel-plated plug blades are made for a longer life and better electrical contact. The electrical timers are UL approved for a 120 to 110 volt timer with an AC receptacle. Instructions for this Christmas remote control system are included.

Caution:
Unplug the outdoor lighting timer when it is not in use. Fully insert the plug into a grounded outlet. Use within the electrical rating marked on the Christmas light switch timer set. Do Not plug more than a total of 1000 watts in the outdoor timers. If the number of watts are not marked on the appliance, multiply ampere rating (on nameplate) by 125 to determine equivalent watts. Add determined watts for each plugged-in appliance or lamp (sum of watts on bulbs) to find total watts being used. Operating temperature range is -22 degrees Fahrenheit to 113 degrees Fahrenheit or -30 degrees centigrade to 45 degrees centigrade. Let the outdoor lighting timer hang downward so moisture does not accumulate in the outlet. Install the cord and unit above ground level with the receptacle in the downward position so it will not fill up with water when raining or snowing. The clock timer is suitable for damp locations. Not for water immersion or for use where directly exposed to water. Inspect the unit periodically for defects. Do Not use damaged light sensing timer. Do Not splice, repair or modify this unit. Store indoors when not in use.

Select this link to view our artificial prelit christmas trees.

Select this link to view our Christmas lights and holiday lights.

Select this link to view our Safety and Care Instructions for Christmas lights.

Instructions:
Insert the light sensing timer�s three-prong plug into a grounded outlet. If you are using the light sensing timer outdoors, be sure to plug the timer into a GFI approved outlet. Plug your Christmas light display or appliance into the single outlet located on bottom of light sensing timer. Select the desired setting to activate your Christmas tree lights and outdoor Christmas decorations.

Select this link to view our How to Page for Christmas Tree Decorating with Christmas Lights.

Select this link to view our Pre Lit artificial Christmas Trees and Pre Lit Christmas Trees.