Our Indoor or Outdoor Three Plug Motion Lighting Remote Control
is the power outlet you have been waiting for. The F/X Lighting remote control Power Strips and Power Protection Supplies have 5 different settings to choose from. No longer do you need to have to replace one bulb to get your lights to flash. With just a press of a button your lights will transform your Christmas holiday light yard display into a light show for all to see. You can plug up to 5 Indoor Christmas Light sets into each outlet. The five different settings to choose from are:
1. Steady On - all 3 outlets are steady on with no special effects.
2. Fading - 3 outlets gradually turn on and off in a random fading pattern.
3. Chasing – 3 outlets illuminate on and off one at a time in sequence to create a chasing effect.
4. Flashing – 3 outlets rapidly turn on and off for a flashing effect.
5. Light Show – Continuously runs through the above effects including steady on. Select to see a complete listing of our Christmas Decorations Ideas.
No more running outside in the winter to turn on and off your Christmas yard lights and displays. Just press the palm remote control button from the warmth of your home and your Outdoor Christmas Decorations displays will turn on or off from up to fifty feet away from the remote control power switch. Radio frequency activates the transceiver module through walls, windows, car, or garage. This keychain remote control motion lighting system will allow you to turn on or off any electrical appliance indoors or outdoors from up to fifty feet away. The battery is included in the key chain remote control light switch transmitter. The remote controls base has a red light power indicator to warn that the unit is plugged in and active. The indoor or outdoor remote control for residential use includes a one foot heavy duty grounded power cord with strain relief plug construction for longer cord life. The 1 to 3 remote control lighting power hub allows three extension cords to be inserted. This remote control for residential use is rated to handle up to 6 amps, 720 watts of current. Nickel-plated plug blades for longer life and electrical contact. The unit is UL approved for 120 volts AC receptacle. Instructions for this Christmas remote control system are included. Check out our selection of Holiday Lights and Decorative Party Lights.
Caution:
Unplug the electric power cables when the remote control light switch base is not in use for extended periods of time. Fully insert the power cords plug into the grounded outlet. Use within the electrical rating marked on the remote set. Do Not plug more than a total of 1200 watts in the power cables remote set. If the number of watts are not marked on the appliance to be used, multiply ampere rating (on nameplate) by 125 to determine equivalent watts. Add determined watts for each plugged-in appliance or lamp (sum of watts on bulbs) to find total watts being used. Operating temperature range is -22 degrees Fahrenheit to 113 degrees Fahrenheit or -30 degrees centigrade to 45 degrees centigrade. Install the power cable and remote controls above ground level with the receptacle hanging in a downward position so it will not fill up with water when it is raining or snowing. The remote controls are suitable for damp locations. The remote control light switch is NOT for water immersion or for use where directly exposed to water. Inspect the remote control lights unit periodically for defects. Do Not use a damaged remote control power switch set. Do Not splice, repair or modify this remote control lighting unit. Store the remote control lights unit indoors when not in use. Pictures of remote controls are not actual size. Select this link to view our Safety and Care Instructions for Christmas Lights.
