This 5 oz. (141 g) Aerosol Spray Artificial Ice Crystals
can is filled with an artificial ice crystal liquid that can be sprayed on windows, mirrors, clear acrylic and all glass surfaces to make them look like ice crystals have formed. This ice frost Artificial Spray Snow For Windows makes a fascinating, decorative Jack Frost effect on any clear smooth surface. This window Christmas ice spray will highlight any home, business or car for the holiday season. The spray frost is easy to apply and easy to clean up. Select to see a complete listing of our Christmas Decorations Ideas.
5 oz. Santa Ice Crystals Approximate Coverage Area:
Note: The Following Coverage Areas Are Only Approximate.
Coverage Area For Windows and Flat non-porous surfaces;
One spray can of Santa Ice Crystals will cover a 4 foot by 6 foot windows or 24 Square Feet with a normal coating.
All shipments must be shipped GROUND FREIGHT ONLY.
No Express Air Deliveries are allowed since the aerosol cans will explode at high altitudes. Select to view the Shipping Information and Delivery Time Map for Ground Shipping. This product is not for sale outside the USA. Check out our entire selection of Artificial Spray Snow For Windows.
Directions:
Shake well before using.
1. If the artificial ice spray has been exposed to freezing conditions, allow sufficient time to thaw prior to use. The ice crystal spray can must be kept at room temperature for several hours before spraying.
2. Hold can upright 12 to 18 inches from surface to be sprayed. Apply an even, wet coat. The spray will be clear when applied, but ice crystals will form within minutes of the application.
3. If clogging develops, remove spray button and soak the tip in warm water for a few minutes. Do not place can itself in hot water. Do Not stick a pin or any other object into the can. Gently replace spray button with a twisting motion. Make sure you point the top of can and spray button opening away from you. After you are finished spraying you can turn the can upside down and depress the valve for several seconds or until clean air starts, to clean out the nozzle.
4. Avoid spraying on furniture, walls, curtains and rugs. Ice crystals can be removed with a brush or dry cloth. If spray should get on woodwork, it can be removed with an all-purpose cleaner.
How to Remove Artificial Ice Crystals on Windows:
To remove the spray on ice crystals from decorated windows and mirrors. First wipe the ice crystal surface with a damp cloth, using warm water or a glass cleaner. Remove the softened crystals with a squeegee or a vinyl cooking spatula.
Cautions:
The content of this aerosol can is under pressure.
Do not puncture or incinerate the aerosol can.
Do not use or store this aerosol can near heat, sparks, open flame, red hot surfaces or other sources of ignition, in direct sunlight or where temperature will exceed 120 degree Fahrenheit.
Use in a well ventilated area only.
Do not intentionally inhale vapor or spray mist.
Avoid contact with skin and eyes. In case of skin or eye contact, flush with water.
Do not take internally.
Keep out of the reach of children.
Do not allow pets to eat the ice crystals.
Storage:
Prevent this container from coming in contact with water for a prolonged period of time. Always keep container in a cool, dry place. The user of this product assumes all risks of use, storage and handling not in accordance with its directions and cautions. Container may explode if heated. The ice crystal content is under pressure. Contains NO CFCs or other ozone-depleting substances. Federal regulations prohibit CFC propellants in aerosols.
This product is Made in USA.
Formation of Artificial Ice Crysals Information:
The visual complexity of ice is familiar to anyone who has ever studied a snowflake or seen the crystal patterns on a frozen windshield. Rene Descartes was the first to study these patterns over 300 years ago, but equations describing them were not derived until 200 years later. In modern times, with the help of computers and numerical analysis techniques, these equations are used to artificially generate snowflake-like patterns.
The visual appeal of patterns in ice has not been lost on the visual effects industry, as many recent movies have prominently featured this effect and have all contained solidification sequences.
