The 10 Candle Tree Lights
have 15 inch spacing between the candles. The overall length of the mini Holiday Lights and Decorative Party Lights candle lights is 16.5 feet. The lights and base are 2 inches tall. The total height of the clip on candle lights with the mini bulb is 2.5 inches. The Indoor Christmas Light candles light set has an add-a-plug connector which allows you to connect other Christmas light sets to it. The end connector is 48 inches from the first mini candle. These mini candle tree lights have a clip on the bottom to connect them to your Christmas tree. Spare light bulbs and fuses are included. Select to see a complete listing of our Christmas Decorations Ideas. Christmas Holiday Light Bulbs Safety Instructions:
When using Christmas tree candles lights, basic precautions should always be followed including these Christmas holiday light safety tips.
Mini Christmas candle lights are for Indoor Use Only.
Seasonal party lights or holiday lights are not intended for permanent installation or use.
Do not mount or place lights near gas or electric heaters, fireplaces, candles or other similar sources of heat.
Do not secure the candle tree lights with staples or nails, or place on sharp hooks.
Do not let the candle lights bulbs rest on the holiday lights supply cord or on any wire.
Unplug the Christmas light sets when leaving the house, when retiring for the night, or if the Christmas tree lights are left unattended.
Your holiday lights, Christmas tree candle lights or party lights are not toys! To avoid risk of fire, burns, personal injury and electric shock the lights should not be played with or placed where small children can reach the holiday light bulbs.
To reduce the risk of fire or electrical shock do not mount or support the Christmas tree lights in a manner that can cut or damage the holiday light sets.
Do not close your doors or windows on the Christmas holiday lights or extension cords as this may damage the wire insulation.
Do not cover the candle light bulbs or party lights with cloth, paper or any material not part of the holiday light when in use.
To reduce the risk of overheating, replace any burned out light bulbs promptly. Use the proper Christmas mini light bulbs with like volt and wattage replacement light bulbs.
Always unplug your Christmas tree candle lights before installing or replacing the christmas light bulbs.
Do not overload the electrical wiring of the candle lights. Only connect the recommended amount of Christmas light sets [usually three sets if not stated in instructions] on one continuous light string. Check out our selection of Power Strips and Power Protection Supplies.
Christmas Holiday Lights with Overload Fuses.
A blown fuse indicates an overloaded circuit and you need to reduce the amount of Indoor Christmas Light connected to the circuit. A blown fuse may also be caused by a short-circuit and the holiday light set with the short-circuit should be discarded.
1.) Always unplug your candle lights before installing or replacing the Christmas light fuses.
2.) Slide open the holiday light fuse access cover on top of the attachment plug towards the plug in metal blades.
3.) Remove the holiday light fuses carefully.
4.) To avoid the risk of fire replace the blown fuses with like amp and volt fuses that were provided with the Christmas lights.
5.) Slide closed the holiday light fuse access cover by sliding the cover closed so that all fuse tabs latch.
6.) To avoid the risk of fire do not replace the factory light plug. The factory holiday light plug contains a safety device (fuse) that should not be replaced. Select to view our entire selection of Outdoor Christmas Decorations.
