3 Foot Led Battery Operated Christmas Tree

This 3 Foot Tiffany Pine Battery Operated Christmas Tree
is approximately 24 inches wide with 130 Tips. The Artificial Prelit Christmas Tree is lite with 30 warm white clear premium quality F5 Led battery lights. The Led bulbs use less battery power. The timer function runs cyclically 6 hours "ON" then 18 hours "OFF". When the timer is turned on it starts and will continue the function tell it is turned off. The green battery pack holds 6 AA batteries. Batteries are not included. Order our low cost quality AA Batteries so you do not have to run around shopping for batteries. There are 8 lighting function available. See "Specifications" below.

The tree is easy to assemble with hinged branch construction. The Christmas tree is constructed of heavy duty wire Christmas pine tree branches and a metal trunk pole. Also included is a Christmas tree stand. The poly vinyl needles on our Artificial Prelit Christmas Trees have dark green needles that gives the trees a natural look. It has sculptured tips on all of the branches. Select this link for more information on Artificial Christmas Trees and X-mas Trees Guide. All of our top of the line Christmas trees are fire resistant, allergy resistant. Select to see a complete listing of our Christmas Decorations Ideas.

BATTERY OPERATION FUNCTION LED LIGHTS DIRECTIONS
SPECIFICATIONS:
1) Applicable: Indoor & Outdoor use
2) Batteries: Alkaline AA x 6pcs (not included)
3) LED rating : Warm White Lite- 3.3V, 20mA.
4) Function: Steady on and 8 difference lighting settings available.
5) Timer runs cyclically 6 hours" ON" & 18 hours "OFF" along with pushing function button once.
6) Lighting program : (1) FLASH (2) RANDOM TWINKLE (3) CHASING OUT (4) CHASING IN (5)FADING (6) RANDOM FADING (7) FADING OUT (8) FADING IN .

INSTALLING THE BATTERIES:
1) Pull the lock's 2 handles up to unlock battery cover.
2) Take the 6 AA size batteries and follow molded polarity direction in battery box to install batteries.
3) Close cover and push lock's handle back to lock box.

PRODUCT OPERATIONS:
1) Make sure the 6 AA batteries are installed.
2) Push button" ON/OFF" once to run" STEADY-ON" lighting &" TIMER" function.
3) Push button " ON/OFF " twice to turn off" STEADY-ON" lighting & " TIMER" function .
4) Push button" ON/OFF" to light up then push "DEMO" to run" 8 DIFFERENCE LIGHTING PROGRAM DEMOSTRATION " & " TIMER" function.

REPLACE LIGHT BULBS
1) Loose lamp lock: Grasp lamp holder & ahead top of bulb to sky. Pull the flap at side of lamp holder from current vertical position to level.
2) Take burnt bulb out of lamp holder: Grasp lamp base flange and pull lamp out of lamp holder straightly.
3) Replace new bulb: Use same rating bulb as the burnt one (refer bulb rating to SPECIFICATION). Grasp lamp base flange and push lamp into lamp holder straightly.
4) Lock lamp base & lamp holder: Push the flap at side of lamp base from current level down to vertical position and push little bit hard to get knob on lamp holder through hole on flap.

CAUTIONS:
1) Don't use rechargeable battery.
2) Always use new AA size Alkaline battery.
3) Replace retired battery immediately.
4) Don't mix up new and retired battery in the battery box.
5) Don't use renew battery.
6) Don't put this product in water,
7) Keep this product away fire source.
There are several types of Power Strips and Power Protection Supplies available. When you remove the tree from the box the branches of the tree will be tied together. The best way to shape the tree is to let down one row of branches at a time, tie the rest back up and shape the branches you let down. For more information view our information page on Prelit Artificial Christmas Trees and Pre-Lit Christmas Trees.

WARNINGS:
1) The Battery Tree is not a toy. Keep small children away!
2) The tree is designed on purpose for decoration.