The Christmas Tree Stand Artificial
has a 21 Inch leg span and they will hold an artificial Christmas tree with a 1.25 Inch diameter tree pole. No assembly is required for these steel tree stands. These heavy duty metal Christmas Tree Stands are ideal for trees between 4 and 6.5 feet tall. To protect the paint on these artificial Christmas tree stands they should be placed on a cloth (if on a hard surface), or onto a carpeted floor. Do not drag these stands. If you still need a tree, you may be interested in one of our high quality Artificial Prelit Christmas Trees. Select to see a complete listing of our Christmas Decorations Ideas.

Tree Stand Dimensions:
Height = 6.5 in (1in - above ground, 5.5 in – pole length); Diameter = 21in; Width of Wide legs = 4.5in – 1in; Width of Slim legs = 3in – 1in; Diameter of Pole (needed) = 1.25in.

These Tree Stands are Easy to Use:
Simply unfold the stand and screw the wing screw into the only hole provided for it, far enough to prevent the stand from folding again. For the quickest and easiest way to set this stand up, follow the directions below. To disguise your Christmas Tree Stands , you may want to purchase one of our Christmas Tree Skirts.

For Optimum Usage of this Christmas Tree Stand, Follow These Directions:
1. Make sure that the wing screw on the tree stand is not screwed in (all the way) BEFORE you place the tree base into the stand.
2. Insert the base of the tree into the tree stand.
3. Screw the wing screw in, one half turn at a time, all the while ensuring you keep the tree pressed up against the side opposite the wing screw. Do this until the wing screw is tight. This will ensure your tree is perpendicular to the floor.

Tree Storage Begins Before you set up your Artificial Tree Stand:
If you would like to make the process of taking it down your artificial Christmas tree quicker and easier, you may want to consider using this tree stand in conjunction with one of our Christmas Tree Stands . If you want to store your artificial tree, with all of its decorations, than you should consider purchasing one of our Rolling Artificial Tree Storage Bags. They already have wheels, you simply pull them up and over the tree, zip them up, use the drawstrings to compress them, and then roll them away. If you utilize one of these stands, we have similar bags, with the same design, that fit over this stand and zip and compress your tree in like fashion. Should the cost of a tree storage bag be more of a concern we also have very affordable poly vinyl bags that can be made to work in the same manner. They just need a small hole cut in the bottom of the bag, for the pole to fit through. You simply roll the bag up under the skirt, then after the season all you have to do is remove the tree skirt and pull the bag up and over the tree, than either tie it off at the top or use a twist tie to seal it off. The poly vinyl bags can be used for artificial trees for storage, or for the disposal of real trees. Check out our selection of Artificial Prelit Christmas Trees.