These Tree Stand for Artificial Christmas Trees
have a 29 inch leg span and they will hold an Artificial Christmas Tree with a 1.25 Inch diameter tree pole. No assembly is required for these Christmas Tree Stands . These Heavy Duty Metal Tree Stands are ideal for trees between 6.5 and 9 feet tall. To protect the paint on these Tree Stands they should be placed on a cloth (if on a hard surface), or onto a carpeted floor. Do not drag these stands. Select to see a complete listing of our Christmas Decorations Ideas.

These Christmas Tree Stands are Easy to Use:
1. Unfold the stand.
2. Screw in the wing screw into the only hole provided for it on the stand, just far enough to prevent the stand from folding again.
3. See steps below; you are finished with the assembly. Select this link to read more on our Artificial Christmas Trees and X-mas Trees Guide.

To ensure that your Christmas Tree Stands up straight follow these simple steps:
1. Make sure that the wing screw on the tree stand is not screwed in (all the way) BEFORE you place the tree base into the stand.
2. Insert the base of the tree into the tree stand.
3. Screw the wing screw in one half turn at a time, being sure to keep the tree pressed up against the side opposite the wing screw until the screw is tight.
Select this link to view all of our Christmas Tree Stands

Tree Stand Dimensions:
Height = 8inch; Diameter = 29 inch; Width of Wide legs = 6in – 1in; Width of Slim legs = 4in – 1in; Diameter of Pole (needed) = 1.25 inches; Minimum Pole Length (under tree) – 5.5 inches; Above ground - 1in.

Tips On Trimming The Tree Trunk Of Live Trees: