20 Valentine Light Decorations
with red light bulbs have 8 inch spacing between the hearts. There are 20 red heart lights on each strand of these Valentine Gifts and Valentine Heart Lights. Each heart is 1 7/8 inches wide by 2 inches high. The heart light is 15.1 feet long. The Valentine’s Day Holiday Lights and Decorative Party Lights have a stackable electrical plug that allows two additional Valentine lights sets to be added on to the Valentine light decorations. Select to see a complete listing of our Christmas Decorations Ideas.
Valentine Light Decorations are for Indoor Use Only.
United States UL approved for 110 volt.
2,000 hour 6 volt red heart light bulbs.
8 inch spacing between the Valentine lights bulbs.
When one light bulb burns out the others remain lighted.
The 20 red heart light set uses only 13.2 watts of energy.
This Valentine’s Day Light Bulb Set has a stackable electrical plug that allows two additional holiday party light sets to be added on.
Up to three additional like holiday light bulb sets can be added.
This unique Valentine’s Day Light Set can be made to flash on and off by replacing the first steady burning bulb with a clear red tipped heart light bulb.
Replacement Christmas Light Bulbs, flasher light bulbs, and fuses are included.
Complete use and care instructions for the holiday light bulbs is also included. Check out our selection of Yard Garden Decor. Holiday Light Bulbs Safety Instructions:
When using the Holiday Lights and Decorative Party Lights, basic precautions should always be followed including
these holiday light safety tips.
Do not use the holiday lights outdoors unless the lights are marked suitable
for indoor and outdoor use. When outdoor holiday lights are used in outdoor applications,
connect the outdoor lights to a ground fault circuit interrupting [GFCI] electrical
outlets. If one is not provided, contact a qualified electrician for proper outdoor lights installation.
Check out our selection of Power Strips and Power Protection Supplies for safely displaying your Valentine Lights.
Seasonal party lights or holiday lights are not intended for permanent installation or use.
Do not mount or place lights near gas or electric heaters, fireplaces, candles or
other similar sources of heat.
Do not secure the holiday light sets with staples or nails, or place on sharp hooks.
Do not let the holiday light bulbs rest on the holiday lights supply cord or on any wire.
Unplug the light bulbs when leaving the house, when retiring for the night, or if
the Valentine lights are left unattended.
Your holiday lights or party lights are not toys! To avoid risk of fire,
burns, personal injury and electric shock the holiday lights should not be played
with or placed where small children can reach the holiday light bulbs.
To reduce the risk of fire or electrical shock do not mount or support the Holiday Lights and Decorative Party Lights
in a manner that can cut or damage the holiday light sets.
Do not close your doors or windows on the lights or extension cords as
this may damage the wire insulation.
Do not cover the holiday light bulbs or party lights with cloth, paper or any material
not part of the holiday light when in use.
If your lights are equipped with push-in type light bulbs, do not twist the holiday
light bulbs. Pull the party light bulbs straight out of the light bulb socket.
To reduce the risk of overheating, replace any burned out light bulbs promptly. Use the
proper light bulbs with like volt and wattage replacement light bulbs.
Always unplug your holiday lights before installing or replacing the light bulbs.
Do not overload the electrical wiring of the holiday lights. Only connect the recommended
amount of light sets [usually three sets if not stated in instructions] on one
continues light string.
